ALL Components Sensors Controllers Classes
Grid List
Jumper Wire (Male-Female) 2.54mm Pitch 20cm Length - Pack of 10
Add to Cart
Components
Jumper Wire (Male-Female) 2.54mm Pitch 20cm Length - Pack of 10
₹20.00 ₹60.00
  • 20 cm length
  • Male to Female connectors
  • Pack of 20 wires
  • Color-coded
  • Durable & flexible
7805 Voltage Regulator IC LM7805 12v to 5v Regulator for Multiple Applications 1pc
Add to Cart
Components
7805 Voltage Regulator IC LM7805 12v to 5v Regulator for Multiple Applications 1pc
₹29.00 ₹40.00
  • No.of Pins: 3pins
  • Max Output Current: 1.5A
  • Max Operating Temperature: 125°C
I2C Serial Interface Adapter Module for LCD
Add to Cart
Components
I2C Serial Interface Adapter Module for LCD
₹169.00 ₹199.00
  • 5V power supply.
  • Serial I2C control of LCD display using PCF8574.
  • Backlight can be enabled or disabled via a jumper on the board.
  • Contrast control via a potentiometer.
  • Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
DHT11 Temperature and humidity detection sensor module
Add to Cart
Components
DHT11 Temperature and humidity detection sensor module
₹62.00 ₹199.00
  • Input Supply voltage (VDC): 3.3 ~ 5
  • Supply Current (mA): measurement 0.3mA standby 60μA.
  • Temperature measurement range: 0~50 degrees
  • Temperature measurement error: ±2 degrees
  • Humidity measurement range: 20%~95%RH
  • Humidity measurement error: ±5%RH
Small Piezoelectric Buzzer – 5V Active Buzzer
Add to Cart
Components
Small Piezoelectric Buzzer – 5V Active Buzzer
₹10.00 ₹22.00
  • Brand: CLDZ
  • MPN: AC1770
  • Voltage Rating (V): 1 to 25
  • Diameter (mm): 17
  • Height (mm): 7
  • Operating Temperature (°C): -20 to 70
300 RPM BO Motor-Straight
Add to Cart
Components
300 RPM BO Motor-Straight ( Yellow )
₹67.00 ₹199.00
  • Cost-effectiveness because of the injection-molding process.
  • Low density: lightweight, low inertia.
  • 200 RPM Speed.
  • Uniformity of parts.
  • Capability to absorb shock and vibration as a result of elastic compliance.
  • Ability to operate with minimum or no lubrication, due to inherent lubricity.
  • The relatively low coefficient of friction.
  • Corrosion-resistance; elimination of plating, or protective coatings.
  • The quietness of operation.
  • Tolerances are often less critical than for metal gears, due in part to their greater resilience.
  • Consistency with the trend to greater use of plastic housings and other components.